A little work here and there over the past week tinkering with the rear power panel. Today received several parts included much need mounting hardware and some new primer. Got the power pa el and support brackets prepped and primed and the. Install all the nut plates. Then mounted the fuse blocks, ground power contractor and e-bus relay and started running some wires. Got the fat wire run from the ground power to the master contractor and the hot and switched battery busses. Then ran wire for the left and right mags. Pulled the wires for the mags and e-bus feed to the front.
Crimped a couple of the fat wire connectors onto the master contractor. Need a click bond support or something to secure the wires to the bottom skin.
Came out well and is really helping me visualize the wiring in the rear.